Aggravated By False Alarms? Try These Suggestions For Using Home Security Motion Sensors In McAllen
Have you ever been startled in the early hours of the morning by a false alarm from a a home security motion sensor? Having your sleep disrupted is frustrating enough, but it’s even worse when you can’t determine why the alarm went off. Luckily, false alarms are fairly easy to prevent. Try these simple tips for using motion-activated devices and see how the right positioning and maintenance will help tremendously in limiting false alarms.
How To Prevent Motion Sensor False Alarms In McAllen
A vital element of your home security, motion sensors often get a bad reputation because of false alarms. Although motion activation is prevalent in different implements like lighting and video cameras, false alarms are most often blamed on standalone devices positioned in corners of interiors. To minimize false alarms, avoid installing them in areas where they may be set off by the following:
- Pets maneuvering over furniture
- Movement from ceiling fans
- Drapes or curtains swaying from your HVAC fan
- Temperature fluctuations as a result of heating systems or sunlight
You should also pay attention to upkeep. Weak batteries will impact reliability and cause outages eventually. Wired models may have a pinched or frayed wire. You also must clean occasionally, as certain creepy crawlies like to camp out in corners. As you’re cleaning, verify the motion sensor cover is snapped on securely.
On a side note, some top systems can reduce false alarms from pets by excluding animals under 2 ½ feet tall and with a weight of 85 pounds or less. Check capabilities before buying to ensure you have the features you need.
What’s The Right Placement For McAllen Motion Sensors?
Keep home security motion sensors high on walls where they may observe as much of your living area as possible, and that should include windows and doors. While putting them close to access points may seem reasonable, this location might reduce the complete coverage area. Besides, positioning them close to a warm, sun-splashed window might trigger sensors that operate by noticing heat fluctuations. Worthwhile home security providers will advise you on the best placement.
How To Use Your Motion Sensors
Detecting trespassers is the primary job of motion sensors, but there are many other reasons for implementing them. Here are just a few:
- Energy efficiency. Motion-activated lights save energy by illuminating only when occupants are in the room. You can even pair your device to a smart thermostat and automatically adjust temperature settings based on whether your household is occupied.
- Track children. Motion detectors can update you when your little ones arrive home from school.
- Trigger indoor video cameras. You can configure your inside cameras to start recording if a motion sensor discovers a disturbance.
When installing a modern home protection package, you can configure all kinds of customized automation with motion sensors.
Get Motion Sensors As Part Of Your Complete Home Security Package in McAllen
Get the robust protection you want for your household with a full-featured home security system in McAllen from Secure24 Alarm Systems. Our reliable motion-detecting equipment may be synchronized with other smart devices like thermostats, lighting, and cameras. Contact (956) 291-4643 today to make your home a safer place.